Form Center

2. 
4. Line locates are only needed if digging deeper than 18 inches.
8. Applicant Information
10. Approved ROW or TxDOT Permit Number*
11. Request Date*
13. Image of Approved ROW Permit*
14. Permit Expiration Date*
16. Email Address to Receive Notifications*
17. Company*
19. Applicant*
20. Applicant Phone*
24. Worksite Information
26. Name of Field Contact*
27. Field Contact Phone*
29. Worksite Address*
30. Nearest cross-street*

    Example: Teel just north of Main

32. Estimated time in days of how long this work will take to complete:*
33. Is locate new or refresh?*

    1. New
    2. Refresh

    *Refresh Requests must be submitted four (4) days prior to expiration and must include an updated map with the new work zone.

35. Type of Work (Include all utilities that will be installed).*
37. Detailed description of area to be located:*

    Please note this should relate to work scheduled to be completed in the next 18 days. If project takes longer than 18 days, please request a refresh.

39. Upload Map of Requested Locate Area*

40. The proposed start and end of the excavation or boring job must be marked by white paint with company initials and date along the curb line or ROW.

42. Confirm by checking the box. *

    1. I confirm the physical location has been marked at the starting point and ending point of excavation or boring path with white paint with company initials and date near curb line or ROW.
44. Examples of acceptable maps
    
45. Example of an unacceptable map
    
47. Examples of acceptable maps
    
48. Example of an unacceptable map
    
50. Disclaimer

    Request for Line Locate for City wet utilities must be submitted 48 business hours before beginning work that connects to existing utilities or is in existing Right of Ways, and/or easements within four (4) feet of existing utilities. The line locates will be valid for a period of 18 consecutive calendar days. A Right of Way or TxDOT permit is required (ref. Ord. 02-05-65). Until locates are provided, excavation in areas noted above will be on hold.

51. Damage to the City Infrastructure during construction requires immediate repair by those responsible for the damages. If the party responsible for the damages does not have the labor or materials to repair the infrastructure immediately, the City of Frisco Public Works Department will repair the damages and the cost of said repair is to be borne by the responsible party. The responsible party will only be able to continue work in the City of Frisco after the invoice is paid to the City of Frisco for the repair of the damages. Any work performed 18 days after a line locate was completed will require a new locate request. The line locate is an approximate location and it is the General Contractor’s responsibility to determine the actual elevations and horizontal locations by non-destructive methods. When working within 20 feet of a wet utility line 16 inches or larger, the contractor is required to pothole and contact a Public Works Line Locator for verification before construction begins.

53. Electronic Signature*

    1. I Agree

    By checking I agree, you agree and acknowledge your electronic signature is valid and binding in the same force and effect as a handwritten signature.

Leave This Blank:


54. 1. Receive an email copy of this form.
55. Email address

    This field is not part of the form submission.

56. Submit

* indicates a required field